Sony CDP-D11 Operating Instructions Manual page 11

To return to the normal play from the
programmed play
In stop mode, press CONTINUE in the remote control.
The indicator of the PLAYMODE position in the display win-
dow turns to "C" from "P".
z
The same track can be programmed repeatedly.
Press the track number as much as times you want
to repeat.
z
The program is retained after all programmed
tracks are played.
By pressing the fl button, the same program is
played again.
Notes
• The program is canceled when the disc is ejected by
pressing the § EJECT button.
• After turning off the power or after disconnecting the AC
cord, tracks after the 25th in the program are canceled.
• Up to 888 minutes can be programmed. If you attempt
to program more, "Time Full" is displayed.
• The program is canceled when the PLAY MODE is
changed.
z
During program operation, you can check the total
playing time of the program. (Program edit)
In step 2, press the = or + button repeatedly
until the track you want to program is displayed. The
selected track number and the total playing time of
when the track is added are displayed. By pressing the
PROGRAM button, the track is programmed.
To check the programmed contents
Before playback starts or during playback, press
the CHECK button.
Each time it is pressed before playback starts, the
track number and its playing time are displayed in the
programmed order.
Track number of the
checking track
REPEAT
P 12 t
PLAY MODE
02/05Step
VARI SPEED
Program number
Total number of
programmed tracks
During playback, information about the track during
play and the later tracks are displayed.
Track number of the current
playing track
REPEAT
P 3 t
PLAY MODE
04/05S 5t03
VARI SPEED
Program number Track number of the
checking track
Total number of
programmed tracks
Playing time of the
checking track
A-PAUSE
3 m 21 s
A-CUE
MARK
15 m 32 s
Total playing time of the
programmed tracks
Elapsed playing time
of the current track
A-PAUSE
m s
1 28
A-CUE
MARK
m s
54
Playing time of the
checking track
VARIOUS OPERATION
Ç¢ÇÎÇ¢ÇÎÇ»çƒê∂ ÇÃǵǩÇΩ
To change the programmed tracks
Before playback starts, the program can be changed.
Contents Operation
Cancel a track in the 1 Press CHECK repeatedly until the
middle track to be canceled is displayed.
2 Press CLEAR.
Cancel the last track Press CLEAR in stop mode.
Each time it is pressed, the last track
is canceled.
Add a track to the end Press the number button of the track
to be added.
Cancel the whole Press CONTINUE.
program
z
Programmed play can be set with the MENU Mode
in the main unit.
1 Press the MENU/EXIT button to display "MENU
Mode".
2 Turn the AMS control to display "PLAY Mode",
then press the AMS control.
3 Turn the AMS control to display "PROGRAM",
then press the AMS control.
4 Press the MENU/EXIT button.
5 Turn the AMS control to display the track number to
be programmed, then press the AMS control. Repeat
this step in the order you want to program.
To check the programmed contents in the main unit
By turning the AMS control in pause mode, track
numbers can be checked in the programmed order.
11