Assignment Of The Feedback Interface - Siemens SIMATIC ET 200AL Manual

4.2.2.5

Assignment of the feedback interface

Feedback interface
The user program receives current values and status information from the module via the
feedback interface.
The figure below shows the address assignment of the module in the process image input in
the configuration method 4xCount.
At Counter 0 x stands for the input byte IB 2 in this case, at Counters 1 to 3 you add 6 bytes,
12 bytes and 18 bytes respectively to this input byte.
When you assign a different start address to the digital input/digital output module, the byte
sequence changes correspondingly.
Figure 4-9
Digital input/Digital output module DIQ 16x24VDC/0.5A 8xM12 (6ES7143-5AH00-0BA0)
Manual, 03/2019, A5E38688112-AC
Address space feedback interface configuration method 4xCount
4.2 Configuration method 4xCount
Counting
63