4. Press the
buttons to select and then
press the
selection. Enter the completion of
WPA2 PSK after password storage.
5. Connect immediately after saving.
•
If connected, the LCD will display as
shown below:
Connected with device
SSID: XXXXXXXX
•
If connect failed, please check Wi-Fi
device and try again.
6. After connection, click the icon of the
App
on the smart device, you may
use it to carry out relative operation.
42
/
/
button to confirm your
Wi-Fi Mode
Station
Disconnect
Display of Wi-Fi Connection Status
/
The Wi-Fi has successfully connected but
App is not enabled:
The Wi-Fi has successfully connected and
App is enabled:
Wi-Fi Mode
AP mode
Connected with device
Disconnect
Wi-Fi Mode
Connected with APP
XXXXX
Disconnect