Fading In And Out (Fader); Inserting A Blank Space During Recording (Record Muting) - Sony TC-KE240 Operating Instructions Manual

Fading In and Out (Fader)

You can gradually increase the recording level at the
beginning of a recording (fade in) or gradually
decrease the recording level at the end of a recording
(fade out).
It is convenient to use this function, for example, when
the tape reaches to its end and you don't want the track
to be cut off abruptly.
EJECT
DIRECTION MODE RESET MEMORY
POWER
To Do the following:
Fade in 1 Follow Steps 1 to 4 of "Recording on a
Tape" on page 6.
2 Start playing the program source and press
FADER at the point where you want the
fade-in to start. During fade-in, the AUTO
indicator flashes. When the fade-in has
completed, the AUTO indicator lights up if
the Auto Rec Level function is working, or
goes off if the Auto Rec Level function is
not working.
Fade out While you're still recording, press FADER at
the point where you want the fade-out to
start. When the fade-out has completed,
"REC" flashes in the display and the deck
pauses.
Note
Fade-in or fade-out is not possible when the REC LEVEL
control is manually set to 0 (minimum) (see page 7).
FADER AUTO indicator
REC LEVEL
AUTO
5
SYNCHRO FADER ARL
4 6
3 7
AMS
2 8
PAUSE REC MUTING REC
1 9
0 10
AUTO CAL DOLBY NR BALANCE
OFF
B B PHONES
C C
MPX
FILTER L R
Advanced Recording Operations
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between the
tracks. The blank spaces allow you to locate the start of
specific tracks afterwards using the Multi-AMS
function (see page 8). You can also use this function to
erase unwanted portions on a tape.
EJECT
DIRECTION MODE RESET MEMORY
POWER
PAUSE P
1
Follow Steps 1 to 5 of "Recording on a Tape" on
pages 6 and 7.
Recording starts.
2 Press REC MUTING R where you want to insert a
blank space.
"REC" flashes in the display and a blank is
recorded on the tape.
After 4 seconds, P lights up and the tape deck
changes to recording pause.
3 Press PAUSE P or · to resume recording.
z
If you want to insert a blank space longer than
4 seconds
Hold down REC MUTING R as long as you want.
After 4 seconds, "REC" flashes faster.
When you release REC MUTING R, P lights up and the
tape deck changes to recording pause.
Press PAUSE P or · to resume recording.
REC LEVEL
AUTO
5
SYNCHRO FADER ARL 4 6
3 7
AMS
2 8
PAUSE REC MUTING REC
1 9
0 10
AUTO CAL DOLBY NR BALANCE
OFF
B B PHONES
C C
MPX
FILTER L R
REC MUTING R
11 GB