Adjusting Power-Saving Features; Adjusting Screen Brightness; Customizing Shooting Information Display; Configuring Custom Functions - Canon PowerShot SX70 HS Advanced User's Manual

z

Adjusting Power-Saving Features

To conserve battery power, you should normally choose
z
saving] → [Display off] and [Auto power off] → [1 min.] or less.
The [Display off] setting is applied even if you set [Auto power off] to
z
[Disable].
[Display off] and [Auto power off] are not available when Eco mode is
z
set to [On].
z

Adjusting Screen Brightness

For maximum brightness (regardless of the
z
setting), press and hold the
the shooting screen or during single-image display. To restore the
original brightness, press and hold the
one second or restart the camera.
z

Customizing Shooting Information Display

To make the grid pattern smaller, choose
z
[Grid display].
To switch from a brightness histogram to an RGB histogram or adjust
z
the display size, choose
The electronic level is not displayed when
z
[ ].
z

Configuring Custom Functions

To restore
z
Controls] settings), choose
[Custom function (C.Fn)] → [OK].
[Shooting info. disp.] → [Histogram disp].
[Custom Functions (C.Fn)] defaults (except [Custom
[Reset camera] → [Other settings] →
[Disp. Brightness]
button for at least one second from
button again for at least
[Shooting info. disp.] →
[AF method] is set to
265
[Power