License plate lights
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
License plate lights
License plate light, removing
and installing
Removing:
CAUTION!
Before beginning repairs on the
electrical system:
Switch off all electrical
consumers.
Switch ignition off and remove
ignition key.
- Remove screws -arrows-.
- Remove lens with bulb.
- Remove bulb (12 Volt/5 Watt)
Installing:
Install in reverse order of removal.
Note:
The license plate light lense contains
a silver reflector strip -arrow-. This
must always face the bumper when
installing.
Página 1 de 1
94-48
13/2/2005