Output shaft, 1st-4th gear, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Fig. 13
Disassembling and
assembling 1st and 2nd
as well as 3rd and 4th
gear locking collar and
synchro-hub
1 - Spring
2 - Locking piece
3 - Locking collar
4 - Synchro-hub
- Slide locking collar over synchro-
hub.
Recesses for locking pieces in
synchro-hub and locking collar
must align.
Fig. 14
Assembling 1st and 2nd
as well as 3rd and 4th
gear locking
collar/synchro-hub
The locking collar has been pushed
over the synchro-hub.
- Insert locking pieces and install
springs 120 offset. Angled end
of spring must locate in hollow
locking piece.
Página 25 de 31
35-39
12/2/2005