Viking K-1900-3 Product Manual
Viking K-1900-3 Product Manual

Viking K-1900-3 Product Manual

Door entry dialer
Hide thumbs Also See for K-1900-3:

Advertisement

Quick Links

Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Provide Door Entry and Keyless Entry
for up to 250 Apartments or Offices
The K-1900-3 converts any touch tone phone
into a multi-number auto dialer that will store up to
250 telephone numbers in non-volatile E
Use with Viking's K-1700-3 or K-1900-8 phones
to provide vandal resistant handsfree or handset
communication.
When a call initiated by the K-1900-3 is answered
by an apartment or business tenant, a built-in
contact closure may be activated to control an
electric gate or door strike. Up to 250 keyless
entry codes may also be programmed, providing
tenants with keyless entry.
In addition, a master keyless entry code and up to
five maintenance codes can be programmed.
Calling activity and keyless entry use can be
monitored using the log bus data output. The K-
Features
• Compatible with Viking's vandal resistant K-
1700-3, K-1900-8 or any Touch Tone phone
• Non-volatile E
2
memory (no batteries required)
• Remotely or locally programmable
• Stores 250 tenant Touch Tone phone
numbers and keyless entry codes
• Programmable tenant's relay activation code
• Programmable master keyless entry code
and five maintenance codes
• Programmable call timer
• Multi-number dialer mode (for Kiosks, etc.)
• Ring-thru mode for calling the entry phone
• Normally open and normally closed (DPDT)
relay contacts for controlling door strikes,
magnetic locks, gates, etc.
• Auxiliary relay input to trigger a timed relay
activation for postal locks, etc.
• Touch tone and pulse dialing toll restriction
• Programmable allow/restrict for 911 and 311
outside calls
• Log bus data output for logging entry
events
www.vikingelectronics.com
Information: (715) 386-8861
PRODUCT MANUAL
2
memory.
1900-3 can be programmed locally or remotely
using a standard Touch Tone phone. The K-1900-
3 has built-in user dialing restriction to help prevent
unauthorized calls and toll fraud.
Applications
• Complete apartment entry system when used
with these Viking products:
- K-1700-3 Handsfree Speaker Phone (DOD 157) OR
- K-1900-8 Wall Phone with Handset (DOD 362) AND
- D-Series Tenant Directories (DOD 158)
• Multi-tenant, gated communities
• Office parks and multi-business complexes
• Kiosks, ATMs, catalog sales, and interactive
point of sale displays
• Reservation phones for hotels, airlines, car
rentals, etc.
Specifications
Power: 120V AC/13.8V AC 1.25A, UL listed
adapter provided
Dimensions: 89mm x 46mm x 132mm (3.5" x
1.8" x 5.2")
Shipping Weight: .74 kg (1.65 lbs)
Environmental: 0° C to 32° C (32° F to 90° F)
with 5% to 95% non-condensing humidity
Talk Battery Output: 32V DC nominal
Connections: (2) RJ11 jacks, 10 pin screw
terminal block
DTMF dialing speed: Normal - 120ms on/off,
fast - 50ms on/off
Relay contact ratings: 5 Amps @ 30V DC/
250V AC
K-1900-3
Door Entry Dialer
August 20, 2015

Advertisement

Table of Contents
loading

Summary of Contents for Viking K-1900-3

  • Page 1 Use with Viking’s K-1700-3 or K-1900-8 phones to provide vandal resistant handsfree or handset communication. When a call initiated by the K-1900-3 is answered by an apartment or business tenant, a built-in contact closure may be activated to control an electric gate or door strike.
  • Page 2: Installation

    N.O. 5A @ 30V DC Door ** Doorstrike maximum * Note: When installing a K-1900-3 with a K-1700-3 Power Supply (not included) phone on a low voltage and/or low loop current phone system extension, a TBB-1B Talk Battery/Loop Current boosting power supply may be required. For Doorstrike more information on the TBB-1B see DOD# 632.
  • Page 3: Accessing The Programming Mode

    Step 2. From a touch tone phone, call the line connected to the K-1900-3. When the K-1900-3 answers, enter “Q” followed by the six digit security code, factory set to Step 3. 845464 (see section B). A double beep will indicate that programming has been entered.
  • Page 4: Security Code

    C. Tenant’s Phone Numbers and Keyless Entry Codes The K-1900-3 can be programmed with up to 250 tenant phone numbers and up to 250 keyless entry codes, a master keyless entry code, and 5 maintenance entry codes. A tenant may activate the door strike from the entry phone by dialing a “#”...
  • Page 5: Programming Examples

    D. Programming Examples These examples would be entered after accessing programming as shown in section A. Programming the K-1900-3... Enter Digits 5551234 #001 1..to dial 555-1234 when a “1” is entered at the entrance phone 9 ##2 2.
  • Page 6 F. Programmable Maximum Call Time The K-1900-3 can be programmed to limit the call time on the entry phone. The maximum call time is programmable from “00” (no maximum call time) to “99” (99 minutes) and is factory set to “02” (2 minutes) (see Programming, section D).
  • Page 7: Operation

    K-1900-3 to the entry phone connected to the phone port. If the door phone has an auto-answer feature, this will allow the user to “monitor” the entry way. The K-1900-3 is still watching for the security code and will seize the line if a valid code is detected.
  • Page 8: Warranty

    This number is valid for fourteen (14) calendar days from the date of issue. 3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your distributor will then replace the Viking product using the same R.A. number.

Table of Contents