Other Functions; Using The Rotary Commander - Sony XR-F5100 Operating Instructions (primary manual) Operating Instructions Manual

Other Functions

You can also control the unit (and optional CD/
MD units) with a rotary commander (optional).

Using the rotary commander

First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
S E L
M O D E
D S P L
By pressing buttons
(SEL)
(SOURCE)
Rotate the VOL control
to adjust the volume.
Press To
(SOURCE)
Change the source
(Radio/Tape/CD*
Power on
(MODE)
Change operation
(Radio band/Tape playback
direction/CD unit*
unit*
(ATT)
Attenuate the sound
(OFF)*
2 Stop playback or radio
reception/Power off
(SEL)
Adjust and select
(DSPL)
Change the display item
D S P L
M O D E
S E L
(ATT)
(MODE)
(DSPL)
(OFF)
1 1
/MD* )/
1
/MD
1 )
By rotating the control
Rotate and release to:
– Locate the beginning of tracks on the tape.
– Tune in stations automatically.
– Skip tracks on the disc*
Rotate, hold, and release to:
– Fast-wind the tape.
– Find a station manually.
– Fast-forward/reverse a track*
Tip
To start playback while fast-winding the tape, press
(MODE).
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change discs during CD (MD) playback*
During playback of a CD containing MP3
files* 3
Push in and repeat rotating quickly to:
– Change discs one by one.
Push in, then rotate and hold to:
3
– Change albums* .
*1 Only if the corresponding optional equipment is
connected.
*2 If your car has no ACC (accessory) position on the
ignition key switch, after turning off the ignition, be
sure to press and hold (OFF) until the display
disappears.
*3 Available only when an optional CD unit with the
MP3 file control function is connected, and MP3 file
is played.
continue to next page t
SEEK/AMS
control
1 .
1 .
PRESET/DISC
control
1 .
13