Adjusting The Sound Characteristics; Attenuating The Sound - Sony XR-C6120 Operating Instructions Manual

Press (LIST) to:
• Display the memorized names.
• Display the program type.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
To increase
To decrease
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for two seconds while
pushing the VOL control.
Tip
You can also change the operative direction of
these controls with the unit (page 15).
14
Adjusting the sound
Press (SOUND) to
adjust the volume
characteristics
and sound menu.
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
2

Attenuating the sound

To restore the previous volume level, press
(ATT) again.
Select the item you want to adjust by
pressing (SOUND) repeatedly.
VOL (volume) n BAS (bass) n
TRE (treble) n BAL (left-right) n
FAD (front-rear)
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts to volume control.)
Press (ATT) on the optional rotary
commander or wireless remote.
"ATT-ON" flashes momentarily.