Summary of Contents for Agilent Technologies E5810
Page 1
All manuals and user guides at all-guides.com Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Agilent E5810 LAN/GPIB Gateway Agilent E5818 LXI Class-B Trigger Box Rack Mount Installation Note One rack mount kit contains the hardware to mount a single E5810/E5818 or two E5810s/E5818s, side-by-side. Agilent Technologies...
Page 2
Rubber Bumpers R u b b e r B u m p e rs 2. Using Pozidriv screwdriver, attach Rack Ear-Half Rack (B) to the E5810/E5818 with three M4x10 Panhead Screws (C). 3. Using Pozidriv screwdriver, attach Rack Ear-Full Rack (A) to the E5810/E5818 with three M4x10 Panhead...
Page 3
Connect GPIB and RS-232 cables. Plug AC Power cord Connect BNC cables. Plug AC Power Cord into AC Power into AC Power port on the E5810. port and the E5818. 5. Using Philips screwdriver, attach Rack Ears to rack with four Machine Screws (D) and four Machine Nuts (E).
Page 4
R u b b e r B u m p e rs 2. Using Pozidriv screwdriver, install a Lock Link (A) on each E5810/E5818 with a Flathead Screw (G). Then, slide the two E5810s/E5818s together so the Lock Links interconnect. See detail “A”.
Page 5
Connect GPIB and RS-232 cables. Plug AC Power cord Connect BNC cables. Plug AC Power Cord into AC Power into AC Power port on the E5810. port and the E5818. 6. Using Philips screwdriver, attach Rack Ears to rack with four Machine Screws (F) and four Machine Nuts (G).