Locating A Disc By Name; List-Up - Sony CDX-C7000X Product Guide Operating Instructions Manual

Erasing the disc memo
1
Press (SOURCE) repeatedly to select
"CD."
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "NAME
DEL" appears.
4
Press (ENTER).
5
Press either side of (DISC/PRST)
repeatedly to select the disc name you
want to erase.
6
Press (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (MENU) twice.
The unit returns to normal CD play mode.
Note
When a personalized label is erased, the original
CD TEXT information will appear in the display.

Locating a disc by name

— List-up (For a CD unit with the custom
file function or an MD unit)
You can use this function for discs that have
been assigned a custom name. For more
information on disc memo names, refer to
"Labeling a CD" (page 12).
1
Press (LIST).
The name assigned to the current disc
appears in the display.
When you assign a disc memo name to a
CD TEXT disc, it takes priority over the
original CD TEXT information.
2
Press either side of (DISC/PRST)
repeatedly until you find the desired
disc.
3
Press (ENTER) to play the disc.
Notes
• After a disc name has been displayed for five
seconds, the display returns to normal play
mode.
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• Some letters cannot be displayed during MD or
CD TEXT disc playback.
• If an optional TV system is connected, the disc
memo name appears in the display of the TV
system but not in the unit's display.
13