Texas Instruments TI-Nspire CX Getting Started Manual page 67

e
3. Press to move through the list of settings. Press
backward through the list.
A bold line around a box indicates it is active.
¢
4. Press to open the drop-down menu to view the values for each
setting.
£
5. Press the
x ·
or to select the value.
6. Click
Make Default
be applied to all future TI-Nspire™ documents, PublishView™
documents, and to Scratchpad.
• Select the question mark to open Help.
• Select Restore to restore the original factory settings.
Changing General Settings in a TI-Nspire™ document
Complete the following steps to change general settings for an open
TI-Nspire™ document. You can apply the settings to the current
document only or choose to make the settings the default settings for
the open document and all future documents.
1. To access
General Settings
c521
e
2. Press to move through the list of settings. Press
backward through the list.
A bold line around a box indicates it is active.
3. When you reach the desired setting, press
menu to view values for each setting.
¤
and keys to highlight the desired option, then press
to save all the settings as default settings that will
from an open document, press
.
Configuring the TI-Nspire™ CX handheld
£
to move
£
to move
¢
to open the drop-down
61