Samsung AQ07**SER Series Service Manual page 14

No Parts
2 TRAY DRAIN
3
CONTROL IN
Samsung Electronics
Procedure
1) Loosen stepping motor wire and detach the
hook of main frame.
) To detach TRAY-DRAIN from the main frame,
pull the bottom of the TRAY-DRAIN towards
you.
1) Unfasten the earth screw.(use + Screw Driver)
) Detach the temperature sensor and Humidity
sensor.
3) Detach COVER-CONTROL from the CASE-
CONTROL.
4) Loosen MPI connector wire(yellow), and MOTOR
wires(white,blue).
5) Take off the CASE-CONTROL from the main
frame.
Operating Instructions and Installation
Remark
3-3