Operating The Appliance; Switching On - Miele KFNS 37432 iD Operating And Installation Instructions

Operating the appliance

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Audible tones").

Switching on

When the appliance is connected to the
electrical supply, the mains connection
symbol  will appear in the display
after a short while.
 Touch the On/Off sensor.
The mains connection symbol  goes
out and the appliance starts to cool
down.
The sensor controls for the available
cooling sections appear in the control
panel:
The refrigerator section sensor control
is highlighted in yellow and the current
temperature in the refrigerator appears
in the display.
Switching on and off
When the refrigerator section door is
opened, the interior lighting comes on
and the LED lighting on the adjustable
shelves becomes brighter until it
reaches its maximum brightness.
When the appliance is switched on for
the first time, the sensor control for the
freezer section and the alarm sym-
bol  will flash until the set freezer
temperature is reached.
When the set freezer temperature is
reached, the sensor control for the
freezer section lights up constantly and
the alarm symbol  goes out.
To enable the temperature to get suffi-
ciently cold inside the appliance, allow
the appliance to run for a few hours
before placing food in it. Do not place
food in the freezer until it has reached
the required coldness (at least -18 °C).
21