Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Add a Viking Entry Phone to an
The C-200 allows single line telephones or a
telephone system to share a phone line with a
single Viking entry phone. Tenants may answer an
entry phone call and converse with the visitor.
The C-200 provides a "Call Waiting" tone when the
phone line is in use.
Tenants may call out to the entry phone for
monitoring purposes.
provided to operate a doorbell, or activate a
camera, lights, etc. NOTE: Not for use with a
door strike.
If additional features (such as doorstrike, multiple
entry phones with caller ID, and keyless entry) are
needed, use the Viking model C-2000B (see
DOD# 156).
Features
• Allows single line telephones or a telephone
system to share a phone line with a door entry
phone
• House phones ring with C.O. line cadence or
distinctive ring when the entry phone "Call"
button is pressed
• Compatible with these Viking entry phones:
- E-10A, E-20B, E-30, E-35, E-40, E-50, E-60,
E-65, E-70 and E-75 Phones
- K-1500-7 Stainless Steel Panel Phone
- Or use with any analog phone
• Provide entry phone activated chimes and
whole house paging when used with a Viking
model SLP-1 Single Line Paging Controller
• Produces double "Call Waiting" tones if the
entry phone is activated when the house
phones are already on a call
• One set of normally open and normally closed
contacts available for operating a doorbell,
camera, lights, etc.
• Add door strike capability with the Viking model
RC-2A Remote Touch Tone Controller
PRODUCT MANUAL
Existing Phone Line
Auxiliary contacts are
www.vikingelectronics.com
Information: (715) 386-8861
Applications
• Add an entry phone to your standard home or
office phones to provide door communication
• Provide commercial or residential security via
two-way handsfree communication at the door
or gate
• Connects in series with a single phone line or
to a phone system's unused line input (loop
start trunk input)
Specifications
Power: 120VAC / 13.8VAC 1.25A, UL listed
adapter provided
Dimensions: 133mm x 104mm x 44mm (5.25" x
4.1" x 1.75")
Shipping weight: 0.9kg (2 lbs.)
Environmental: 0°C to 32°C (32°F to 90°F) with
5% to 95% non-condensing humidity
Contacts: .5A @ 125V AC, 1A @ 30V DC
Ring Output: 3.5 REN, capable of ringing (7) 0.5
REN phones
Auxiliary Power Output:
maximum
Talk Battery: 32V DC
Connections: (12) cage clamp screw terminals
C-200
Basic Single Entry
Phone Interface
August 18, 2015
12VDC @ 300mA