Advertisement
Quick Links
Designed, Manufactured and Supported in the USA
VIKING
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
Amplify Key Phone Ringing and Paging
The M2W is designed to amplify the paging
announcements and ringing tones of key
system telephone speakers in noisy areas.
The M2W can also be used to boost the
paging capacity of other paging amplifiers.
The M2W comes complete with one 25AE 8
ohm paging horn, an amplifier and a plug-in
transformer.
One 25AE Viking
Paging Horn
included
Features
• Adjustable volume control
• Powers up to three 8 ohm speakers
• Screw terminal connections
• Power supply included
• One weather resistant 25AE paging horn
included
• Optional additional 25AE paging horns or
30AE ceiling speakers available, see
DOD# 498 for more information
www.vikingelectronics.com
Information: (715) 386-8861
PRODUCT MANUAL
Applications
• Amplify key phone paging and ringing
• Add speakers to fully loaded paging
systems
Specifications
Power:
120V AC/13.8 VAC 1.25A, UL listed
adapter provided
Dimensions: M2W - 53mm x 74mm x 25mm
(2.1" x 2.9" x 1") 25AE - 127mm (5") diameter
Shipping Weight: 1.13 kg (2.5 lbs)
Environmental: 0° C to 32° C (32° F to 90° F)
with 5% to 95% non-condensing humidity
Speaker: (1) 25AE 8-ohm 5 watt paging horn
included
Amplifier: 2 watts (across 8 ohms) - powers up
to (3) 8-ohm or (16) 45-ohm speakers
Sound Pressure: 110 dB SPL @ 1 meter (25AE
paging horn), 103 dB SPL @ 1 meter (30AE
paging speaker)
Connections: 6 position screw terminal block
M2W
Paging Power
Amplifier
July 8, 2016
Advertisement
Related Manuals for Viking M2W
Summary of Contents for Viking M2W
- Page 1 The M2W is designed to amplify the paging announcements and ringing tones of key system telephone speakers in noisy areas. The M2W can also be used to boost the paging capacity of other paging amplifiers. The M2W comes complete with one 25AE 8 ohm paging horn, an amplifier and a plug-in transformer.
- Page 2 Note: Make sure the screw heads are fully driven into the base to avoid shorting the circuit board leads. (2) #6 Flathead VOLUME Screws or Sheetrock VIKING Internal View © Screws PAGING AMP of the M2W MODEL M2W VIKING ELECTRONICS HUDSON, WI 54016 POWER SPEAKER OUT AUDIO IN Mounting 13.8 VAC Holes...
- Page 3 Step 2. Connect the power supply to 13.8 VAC screw terminals 1 & 2. Step 3. The M2W may be used to increase the capacity of existing paging systems (PA-2A shown). Each M2W can power (3) additional 8-ohm speakers. VIKING...
- Page 4 Product Support: (715) 386-8666 Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.