How To Access The Self-Check Screen - Panasonic LX600 Technical Information

How to Access the Self-check Screen

Access
1. Place the unit in TV mode.
2. While pressing the VOLUME
DOWN button on the main
unit, press the SLEEP button
on the remote controller unit
simultaneously
Exit
1. Press one of the channel
selection buttons to return to
the normal screen.
To get into the Self-check mode, press and hold down the VOLUME DOWN
button on the front of the unit, and the SLEEP button on the remote control.
Hold the buttons down for at least three seconds. The unit self tunes to
channel 3. The word "SELF-CHECK", followed by a graphic OSD appears at
the center of the screen.
All Customer settings (parameters) will be erased. Access the self-check
screen to reset the unit. This brings the unit back to factory default.
If the Communication Control port of an IC is addressed and a response is
not received by the system control IC, then " - - " or "NG" will appear in
place of " OK ".
.
19