Sony HVR-S270U Operating Manual page 125

qf
AUDIO MONITOR
qg
CH1/2
MIX
CH3/4
L R
CH 1 CH 2
CH 1
qh
CH 2
AUTO AUTO
CH 3 MAN MAN
CH 4
LINE LINE
qj
MIC MIC
MIC MIC
MONITOR + +
48V 48V
SELECT
INPUT1 INPUT2
qk
A Built-in speaker
The speaker can be used to monitor E-E
sound during recording, and playback
sound during playback. The speaker also
sounds alarms to reinforce visual warnings.
If you connect earphones to the PHONES
jack, the speaker is automatically muted.
* E-E: Abbreviation of "Electric-to-Electric." In
E-E mode, video and audio signals input to the
camcorder are output after passing through
internal electric circuits only. This can be used
to check input signals.
B MONITOR dial (56)
C Sub LCD panel (131)
D LCD BACK LIGHT switch
When you set the switch to ON, the backlight
of the sub LCD screen turns on.
E DATA CODE button (58)
F Video control buttons (STOP/REW/
PLAY/FF/PAUSE/REC/SLOW/CUE/
REVIEW) (55)
G PHONES jack
Plugging earphones into the jack
automatically cuts off the sound from built-in
speaker.
1
2
3
4
qd qs
RESET
REC CH SELECT
IN2
IN1
IN3
CH 3 CH 4
IN4
CH1 CH2
2CH MODE
AUTO AUTO
MAN MAN
LINE LINE
MIC MIC
MIC MIC
+ +
48V 48V
INPUT3 INPUT4
ql w;
*
5
ST OP
H TC/U-BIT button
Switches between time code and user bit to
display on the sub LCD screen (display on the
LCD screen also changes).
I WARNING lamp (106)
J AUDIO LEVEL DISPLAY switch
Switches between CH1/CH2 and CH3/CH4
audio level meters to display on the sub LCD
screen (display on the LCD screen also
changes).
K Battery release button (15)
L RESET button
If you press the RESET button, all settings
including the clock setting (except the Picture
profile and Camera profile settings) return to
the default.
M REC CH SELECT switch (45)
N CH1/CH2/CH3/CH4 dials (45)
O AUDIO MONITOR switch (47)
P CH1/CH2/CH3/CH4 switches (45)
Q MONITOR SELECT button (47)
R INPUT1/INPUT2/INPUT3/INPUT4
switches (45)
S Access lamp (23)
T Memory Stick Duo slot (23)
DATA CODE REVIEW CUE REC
REW PLA Y FF P AUSE SLO W
6
7
8
9
q;
qa
Continued ,
125