KitchenAid 5KGB Quick Start Manual page 4

This is a quick guide for using the glass bowl 5KGB:
The glass bowl is designed exclusively for use with the tilt-head stand mixers (models 5K45 and
5KSM150PS/5KSM156PS). For complete information on the use of these stand mixers, please read
the Instructions and Recipes guide that came with your stand mixer.
GUIDE TO ATTACHING GLASS BOWL
This glass bowl is designed to fi t several diff erent tilt-
head stand mixers.
It uses a specially designed polymer thread ring
between the glass and the metal bowl clamping
plate on the mixer to ensure a proper fi t. Follow these
instructions to attach the glass bowl to your stand
mixer.
To Attach Thread Ring to the Glass Bowl
1. Turn bowl over.
2. Screw the plastic thread ring clockwise
onto the bottom threads of the glass bowl
until it is firmly attached.
To Attach Glass Bowl to Mixer
1. Turn speed control to "0" (OFF).
2. Unplug stand mixer.
3. Tilt motor head back.
4. Place bowl on bowl clamping plate.
5. Turn bowl gently in the clockwise
direction.
Lock Unlock
To Remove Glass Bowl from Mixer
1. Turn speed control to "0" (OFF).
2. Unplug stand mixer.
3. Tilt motor head back.
4. Turn bowl counterclockwise.
To Remove Thread Ring from the Glass Bowl
1. Turn bowl over.
2. Rotate the thread ring counterclockwise
until it is removed.
3. If the thread ring is too tight, place the
bowl back into the bowl clamping plate
and turn the bowl counterclockwise until
the thread ring is loosened.