Sony Handycam HDR-FX7 Operating Instructions Manual page 40

Changing the settings of your camcorder recordings (Continued)
Picture profile
number (setting
name)
PP1
:PORTRAIT
PP2
:CINEMA
PP3
:SUNSET
PP4
:MONOTONE
PP5
:------
PP6
:------
1
During standby, press the
PICTURE PROFILE button C.
2
Select a picture profile number by
turning the SEL/PUSH EXEC dial
A, then press the dial.
[PP1] through [PP6] are available.
You can shoot with the settings of the
selected picture profile.
3
Select [OK] by turning the SEL/
PUSH EXEC dial A.
To cancel the picture profile recording
Select [OFF] in step 2, then press the SEL/
PUSH EXEC dial A.
40
Recording condition
Appropriate setting to
record people
Appropriate setting to
record film-like pictures
Appropriate setting to
record sunset
Appropriate setting to
record monotone pictures
You can assign your own
setting
You can assign your own
setting.
To change the picture profile
You can change the settings in [PP1]
through [PP6].
1 Press the PICTURE PROFILE button
C.
2 Select the PICTURE PROFILE number
by turning the SEL/PUSH EXEC dial
A, then press the dial.
3 Select [SETTING] by turning the SEL/
PUSH EXEC dial A, then press the
dial.
4 Select an item to be adjusted by turning
the SEL/PUSH EXEC dial A, then
press the dial.
5 Adjust the picture quality by turning the
SEL/PUSH EXEC dial A, then press
the dial.
Item Adjustment
[COLOR –7 (low) to +7 (high)
LEVEL] –8 (black and white)
[COLOR –7 (greenish) to +7
PHASE] (reddish)
[SHARP- 0 (softer) to 15 (clearer)
NESS]
[SKINTON To make wrinkles less
E DTL] noticeable by suppressing
the outlines on the part of
skin color.
[TYPE1] (the color range
recognized as a skin color
is narrow) to [TYPE3] (the
color range recognized as
a skin color is wide)
[OFF]: no adjustment
[WB –7 (to make picture bluish)
SHIFT] to +7 (to make white parts
reddish)
[CINEMA- When you set [ON],
TONE pictures are recorded with
GAMMA] the gamma curve that
reproduces the natural
gradation sequence,
similar to that of film
cameras