Auto Slw Shuttr - Sony Handycam HDR-CX7E Handbook

20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
STEADYSHOT
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] (
using a tripod (optional), then the image
becomes natural.

AUTO SLW SHUTTR

(Auto Slow Shutter)
When recording in dark places, the shutter
speed is automatically reduced to 1/25
second (The default setting is [ON]).
X.V.COLOR
When recording, set to [ON] to capture
wider range of colors. Various colors such
as the brilliant color of flowers and
turquoise blue of the sea can be more
faithfully reproduced.
b Notes
• Set [X.V.COLOR] to [ON] only when the
recorded content will be played back on an
x.v.Color-compliant TV. Otherwise, set to
[OFF] (the default setting).
• If the movie recorded with this function [ON] is
played back on an non-x.v.Color-compliant TV,
the color may not be reproduced correctly.
• [X.V.COLOR] cannot be set to [ON]:
– while recording with SD (standard definition)
image quality
– while recording a movie
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear
(The default setting is [OFF]).
z Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
ZEBRA
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
) when brightness. When you change the default
setting,
is not recorded.
B OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
• IRE represents the unit of images brightness
amplitude.
B AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
– When your camcorder recognizes the
– When you press DISP/BATT INFO to
– When you select the movie recording
is displayed. The zebra pattern
REMAINING
remaining "Memory Stick PRO Duo"
capacity with the POWER switch set to
(Movie).
switch the indicator from off to on with
the POWER switch set to
mode on the HOME MENU.
(Movie).
61