Sony Handycam HDR-UX7 Operating Manual page 22

Step 2: Charging the battery pack (Continued)
To remove the battery pack
1 Slide the POWER switch to OFF
(CHG).
2 Raise the viewfinder.
3 Press the BATT (battery release) button
and remove the battery pack.
b Notes
• When you remove the battery pack or the AC
Adaptor, make sure that the
(Still) lamp (p. 24) is turned off.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (see page 109 for the
details of storage).
To use an outside power source
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
22
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
(Movie) lamp/
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
HDR-UX5
Remaining battery (approx.)
Recording capacity (approx.)
Battery pack
NP-FH50
NP-FH60 (supplied with
HDR-UX5)
NP-FH70 (supplied with
HDR-UX7)
NP-FH100
Continuous
Battery pack recording
time
Image HD
quality **
NP-FH50 60
60
60
NP-FH60 75
(supplied)
75
90
Charging time
135
135
170
390
Typical
recording
time*
SD HD SD
70 30 35
75 30 35
75 30 35
95 35 45
100 35 50
100 45 50