Sony Handycam HDR-XR500V Owner's Manual page 84


Notes
The recommended distance to the subject when using the built-in flash is about 0.3 to 2.5 m (1 to 8 feet).

Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat

discoloration or dust obscures the lamp.
You cannot set this item when a filter or a conversion lens is attached to your camcorder.

The /CHG (charge) lamp (p. 8) flickers while charging the flash, and remains lit when the battery charge

is complete.
If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective.

FLASH LEVEL
You can set this function when you record photos using the built-in flash, or an external flash
(sold separately) that is compatible with your camcorder.
Steps
(HOME) (SETTINGS)

setting
 
HIGH ( )
 NORMAL ( )
LOW ( )
REDEYE REDUC (Redeye reduction)
You can set this function when you record photos using the built-in flash, or an external flash
(sold separately) that is compatible with your camcorder.
When you set [REDEYE REDUC] to [ON], then set [FLASH MODE] to [AUTO] or [ON],
appears. You can prevent redeye by activating the pre-flash before the flash flashes.
Steps
(HOME) (SETTINGS)

setting
 
 OFF
ON ( )

Notes
The redeye reduction may not produce the desired effect due to individual differences and other

conditions.
The redeye function does not work with automatic recording using [SMILE SHUTTER].

DIAL SETTING
You can select an item you want to set to the MANUAL dial. For details, see page 38.
[PHOTO SETTINGS]


Makes the flash level higher.
Makes the flash level lower.
[PHOTO SETTINGS]


Does not prevent redeye.
Prevents redeye.
[FLASH LEVEL]

[REDEYE REDUC]

8
a desired

a desired
