Sony HANDYCAM HDR-CX100 User Manual page 92

Images stored on the "Memory Stick PRO
Duo" media cannot be deleted.
The maximum number of images that you can

delete on the index screen at one time is 100.
You cannot delete the protected images.

The data file name is not indicated
correctly or flashes.
The file is damaged.

The file format is not supported by your

camcorder (p. 105).
Recording
Refer also to "Memory Stick PRO Duo"
media (p. 91).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE

to (Movie) or (Photo) (p. 28, 30).
Your camcorder is recording the image you

have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete

unnecessary images (p. 47).
Total number of movie scenes or photos

exceeds the recordable capacity of your
camcorder (p. 98). Delete unnecessary images
(p. 47).
Photos cannot be recorded.
You cannot record photos together with:

[SMTH SLW REC]

[FADER]

The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you

have just shot on the recording media.
The imaging field looks different.
The imaging field may look different

depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the

time available for recording may be shorter, for
example when recording a fast moving object,
etc. (p. 98).
There is a time difference between the
point when START/STOP is pressed and
the point that the recording movie is
started or stopped actually.
On your camcorder, there may be a slight

time difference between the point where you
press START/STOP and the actual point that
recording movie starts/stops. This is not a
malfunction.
The horizontal to vertical ratio of the
movie (16:9 (wide)/4:3) cannot be
changed.
The horizontal to vertical ratio of high

definition image quality (HD) movies is 16:9
(wide).
The auto focus does not function.
Set [FOCUS] to [AUTO] (p. 85).

The recording conditions are not suitable for

auto focus. Adjust the focus manually (p. 85).
SteadyShot does not function.
Set [ STEADYSHOT] to [ON] (p. 67).

Even if [ STEADYSHOT] is set to

[ON], your camcorder may not be able to
compensate for excessive vibrations.
The subjects passing by the screen very
fast appear crooked.
This is called the focal plane phenomenon.

This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out
image signals, the subjects passing by the lens
rapidly might appear crooked depending on
the recording conditions.
9