Before First Use - AEG GS60AIW User Manual

Hide thumbs Also See for GS60AIW:
Table of Contents

Advertisement

Available languages

Available languages

7.1 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates TimeSaver
and vice versa.
How to activate XtraDry
Press Option until the indicator
The display shows the updated
programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the
baskets.
After starting a programme, it may take
up to 5 minutes for the appliance to
recharge the resin in the water softener.
It seems that the appliance is not
working. The washing phase starts only
after this procedure is completed. The
procedure is repeated periodically.
8.1 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
7.2 TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
. It is
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
is
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with
XtraDry.
How to activate TimeSaver
Press Option until the indicator
is on.
The display shows the updated
programme duration.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
2. Put 1 litre of water in the salt
3. Fill the salt container with dishwasher
4. Carefully shake the funnel by its
counterclockwise and remove it.
container (only for the first time).
salt (until it is full).
handle to get the last granules
inside.
ENGLISH
13
is on.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Gs60aibGs60aim

Table of Contents