Remote Control Battery Installation - InFocus IN13x Series Manual

Remote Control Battery Installation

1. Push the clip to release the battery cover.
2. Install new batteries (AAA/R03). Ensure that you have the
batteries' polarity (+/–) aligned correctly.
3. Close the battery cover and press it down until it clicks into
place. Do not mix different types of batteries or new and old
batteries.
To ensure safe operation, please observe the following
precautions :
Use AAA/R03 type batteries.
`
Avoid contact with water or liquid.
`
Do not expose the remote control to moisture or heat.
`
Do not drop the remote control.
`
If the batteries have leaked in the remote control, carefully
`
wipe the case clean and install new battery.
There is a risk of explosion if the batteries are replaced with
`
the wrong type.
Dispose of used batteries according to the instructions.
`
Remove the batteries from the remote control when not using
`
for extended periods.
The remote control may fail to operate if the infrared remote
`
sensor is exposed to bright sunlight or fluorescent lighting.
User Controls
25
English