Sony DVCAM DSR-PD170P Operating Instructions Manual page 165

Identifying the parts and controls
rs
rd
rs Remote sensor
rd Camera recording lamp (p. 18)
rf INPUT1 REC CH SELECT switch (p. 10)
rg INPUT1 INPUT LEVEL selector (p. 10)
Attaching/removing the hood with a lens cap
To attach the hood with a lens cap, fit the line on the hood to the corresponding line on
the lens frame, then screw the hood clockwise and tighten the lower hood fixing screw.
To remove the hood with a lens cap, loosen the lower hood fixing screw, and unscrew
the hood with a lens cap counterclockwise.
REC CH REC CH INPUT INPUT
SELECT SELECT LEVEL LEVEL
CH1•CH2 LINE
MIC
CH1
MIC
ATT
INPUT1
rh INPUT1 +48 V switch (p. 10)
rj INPUT2 +48 V switch (p. 10)
rk INPUT2 INPUT LEVEL selector (p. 55)
To open/close the shutter of
the hood with a lens cap,
slide the knob to your
desired direction according
to the arrow.
rf
rg
rh
INPUT
+48V +48V LEVEL +48V
ON LINE ON
MIC
OFF OFF
rj
MIC
ATT
INPUT2 INPUT2
rk
165