Siemens SINUMERIK 840 Planning Manual page 109

08.89
Output list 1
Output list 1 is relevant for message frames in output direction.
In output list 1 the corresponding characters 1 to 6 of the identification are related to the
function number.
Furthermore, the repetition times and rates as well as a reference to the format identifier are
included in the list. The function number is used as a search key in output list 1. The figure
"Structure of output list 1" shows an example of an entry in output list 1 by means of two
message frames of the synchronization session.
Example: Synchronization session (automatic synchronization by production control)
Fct. ID
No. 1-6
18 R-SY--
Mess.fr.
No. 2
17 T-SY-F
• •
• •
• •
Configuration of output list 1 for two message frames of the synchronization session
Structure of output list 1
Format list
The format of the useful data is described in the format list. A cross reference to the format
description in the format list is made by means of a symbol- the format identifier - in input list 1
and output list 1. The format list is required for the representation of the useful data which is
checked by means of test functions.
© Siemens AG 1989 All Rights Reserved
SINUMERIK 840/880 (PJ)
TIME-INST TIME-RESP
(instruction) (response)
Default value Default value
(specified by (specified by
SINEC NM or SINEC NM or
NML) NML)
6FC5 197-0AB20-0BP0
7 Configuration and Test
7.1.3 SINPS 231
REPETITION Format
flag identifiers
e.g.
acknowled-
gement
e.g.
abort
Default value
•
(specified by •
SINEC NM or •
NML)
7–5