Viewing Images On A Tv Screen - Sony DSC-P2 Operating Instructions (primary manual) Operating Instructions Manual

Viewing images on a TV screen

A/V OUT (MONO) jack
A/V connecting cable
1
(supplied)
, Using the A/V connecting
cable, connect the A/V OUT
(MONO) jack of the camera to
the audio/video input jacks of
the TV set.
If your TV has stereo type input jacks,
connect the audio plug (black) of the A/V
connecting cable to the Lch jack.
• Connect the A/V connecting cable to the
camera and the TV set only after confirming
that both are turned off.
32
2
TV/Video toggle switch
, Turn on the power of the TV
set, and set the TV/Video
toggle switch of the TV to
"Video."
• Depending on your TV set, the name and
location of this switch may be different.
60min
100-0028 2002 7 4
FILE BACK/NEXT
3
, Set the mode dial to
turn on the camera.
Press b/B on the control button to select an
image.
• When using this feature, it may be necessary to
switch the video output signal to match that of
your TV system (page 93).
1600
8 8
/
10:30
PM
VOLUME
, and