DSC PC5508Z Manual

Alarm System Manual
How do I Arm the System?

Enter your 4 digit code, and wait for the beeps (countdown). If you don't hear the beep, beep,
beep, beep.... then your system is not armed. When armed, the red "Armed" light" will be on.

If you make a mistake when pressing keys on your keypad, press the [#] key and start again.

If you accidentally set off the alarm, wait two to five minutes for the central monitoring station
to call you. If your alarm system is not monitored, then no-one will call. To turn off the alarm,
do the same as when arming the alarm.
Help! My Alarm is Going off!

Enter your alarm system (4 digit) code, and it will turn off.
My alarm went off. Why?

Press *3 to determine which zone triggered the alarm. The number will light up
corresponding to the zone that was triggered.
Why is my Trouble Light on (the System Light on the PC 1555 Keypad)?
A trouble will be indicated by the Trouble light, which will remain ON until the trouble condition
is cleared. To view the type of trouble condition, press *2. One or more zone indicators will turn ON,
indicating the various trouble conditions:
ZONE INDICATOR TYPE OF TROUBLE
1 Service required. Call your installation company for service.
2 Indicates the loss of AC power. When this trouble occurs, the Trouble light will turn ON but keypad buzzer
will not sound.
3 Telephone line trouble.
4 The panel has failed to communicate with the central station.
5 Zone fault. Press [5], the zone indicator(s) corresponding to the faulted zones will turn ON.
6 Zone tamper. Press [6] and the zone indicator(s) corresponding to the tampered zones will turn ON.
7 Low zone battery. This trouble is generated when a wireless device exhibits a low battery condition.
8 Loss of time on system clock. To set the system time, follow the instructions in "Setting System Date and
Time".
How do I turn on/off the Door Chime?
To Make the door chime, press the * 4 to turn the door chime on, and *4 to turn door chime
off:
What does the system light do on the PC1555 Keypad?
If the System light is ON, one or more of these conditions