Sony Handycam DCR-TRV461E Operation Manual page 78

LCD SET
LCD BRIGHT
LCD BL LEVEL
LCD COLOR
A/V c DV OUT
78
Using the Menu
Notes
b
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
• You cannot adjust the balance for tapes recorded on other devices in the Hi8
8 mm system.
The recorded picture will not be affected by this setting.
See page 18 for details.
You can adjust the brightness of the LCD screen's backlight.
GNORMAL
Standard brightness.
BRIGHT Select to brighten the LCD screen.
Notes
b
• When you connect your camcorder to outside power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is reduced by about 10 percent during recording.
Touch / to adjust the color on the LCD screen.
Low intensity
You can connect a digital device and an analog device to your camcorder and
convert the signal transmitted from the connected devices to the appropriate signal
on your camcorder.
GOFF Select when not using the Digital convert function.
ON ( )
To output analog images and sound in digital format using your
camcorder.
The analog signal input to the A/V jack of your camcorder will be
converted and output from the DV Interface of your camcorder.
For details, refer to the "Computer Applications Guide."
High intensity
/standard