Changing The Default Settings With The Menu - Sony DCR-TRV40 Operating Instructions Manual

Changing the default settings with the menu

To make the menu display disappear
Press MENU.
Menu items are displayed as the following icons:
Selecting the mode setting of each item
Menu items differ depending on the position of the POWER switch. The screen shows
only the items you can operate at the moment.
The POWER switch is the name of the switch on the DCR-TRV50. It is referred to as
MEMORY on the DCR-TRV40.
Icon/item
MANUAL SET
P EFFECT
FLASH LVL
WHT BAL
N.S. LIGHT
AUTO SHTR
Note on FLASH LVL
You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the
flash level.
200
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEMORY SET
PRINT SET
CM SET
TAPE SET
SETUP MENU
OTHERS
Mode
——
HIGH
z NORMAL
LOW
——
z ON
OFF
z ON
OFF
Meaning
To add special effects like those in films or on
the TV to images (p. 60, 75)
Makes the flash level higher than normal.
Normal setting
Makes the flash level lower than normal.
To adjust the white balance (p. 54)
To use the NightShot Light (p. 35)
To cancel the NightShot Light
To automatically activate the electronic shutter
when shooting in bright conditions
To not automatically activate the electronic
shutter even when shooting in bright conditions
z is the default setting.
POWER
switch
VCR
CAMERA
CAMERA
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK
CAMERA