Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Configuring EFM or ATM Mode and a DSL Group
Use the Cisco IOS CLI on the router in global config-controller mode to configure the mode on the
Cisco EHWIC-4SHDSL-EA or the C888EA.
Note
The dsl-group must be removed before changing from a previously configured mode.
SUMMARY STEPS – ATM
1.
2.
SUMMARY STEPS – EFM
1.
2.
mode atm
One of the following:
dsl-group auto
•
dsl-group DSL_group_number pairs link {m-pair | ima}
•
mode efm
One of the following:
dsl-group auto
•
•
dsl-group DSL_group_number pairs link {efm-bond}
Configuring Cisco Multimode G.SHDSL EFM/ATM in Cisco ISR G2
Configuring Cisco G.SHDSL EFM/ATM
5