Using The Command Test Editor - BIXOLON BGT-100P Manual

4-3 Using the Command Test Editor

1) If the Communication Setting is OK, click the "Command Test Editor" button.
2) If the "Command Test Editor" button is pressed, the following dialog box will appear.
Using this Dialog, the user can write and edit the command and send to the printer.
Each button of "Printing Option" and "Etc" group can insert commands to edit box.
Also "Write Command" button can transfer these commands to the printer. To verify the
result of sending the command can use the "Print Test String" button.
Rev. 1.13 - 16 -