Playing The Picture On A Tv - Sony Handycam DCR-PC53E Operating Manual

Playing the picture on a TV

Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation
(p. 8). Refer also to the instruction manuals supplied with the devices to be connected.
A/V or A/V OUT jack
: Signal flow
A/V connecting cable (supplied)

Connect the input jack of the other device
to the A/V (DCR-PC55E) or A/V OUT
(DCR-PC53E) jack on your camcorder or the
Handycam Station.
A/V connecting cable with S

VIDEO (optional)
When connecting to another device via the
S VIDEO jack, by using the A/V connecting
cable with an S VIDEO cable (optional),
pictures can be reproduced more faithfully
than with the supplied A/V cable connection.
Connect the white and red plugs (left/right
audio) and S VIDEO plug (S VIDEO
channel) of an A/V connecting cable
(optional). In this case, the yellow (standard
video) plug connection is not necessary. S
VIDEO connection only will not output
audio.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE.
32
1
(Yellow) (White)
2
When your TV is monaural (When
your TV has only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack
and connect the white (left channel) or the
red (right channel) plug to the audio input
jack of your TV or VCR.
• When connecting the A/V connecting cable to
the A/V jack (DCR-PC55E)/A/V OUT jack
(DCR-PC53E) on your camcorder, remove your
camcorder from the Handycam Station.
• You can display the time code on the TV screen
by setting [DISP OUTPUT] to [V-OUT/
PANEL] (p. 50).
(Red)
IN
VCRs or TVs