Using The Password Setting; Using The Schedule Task - Sony SNC-HMX70 Application Manual

Using the Password Setting

Depending on the device type, you can set the password.
Note
When you set the password, please be sure that such
password may have a chance to be leaked to some
others. Please take care while setting the password.
1
Select a device you want to set the password.
Depending on the device type, you can select
multiple devices at the same time.
2
Select Password Setting(B) in the Tools(T) menu.
3
Enter the password then click OK.

Using the Schedule Task

You can specify the time or interval to change the Device
setting or perform Firmware upgrade.
Click Task to display the Task List, which shows a list
of scheduled executable tasks.
Task List
Displays the list of scheduled executable tasks.
Add
Displays the Task Wizard.
Modify
You can edit a task.
Delete
You can delete a task.
Show Detail
Displays the detailed information on a task.
Start
This reserves a task.
Stop
You can cancel a task reservation.
Cancel
Closes the Task List.
Creating a task
1
Click Add.
Displays Task Wizard.
2
Click Next.
3
Select a device to which the task is assigned.
A list of devices registered in My device is
displayed. Select the device you want to assign the
task to from the My device list, and register in
Device(s) in task list.
My Device: Display a list of cameras registered in
My devices.
Device(s) in task: Display a list of devices set to
execute a task.
Add: Register a device in Device(s) in task.
Remove: Removes a device from Device(s) in task.
Up/Down: Changes the order of devices in
Device(s) in task.
4
Click Next.
5
Select the task action.
23
Using the SNC toolbox