Sony DCR-HC85 Marketing Operation Manual page 104

To end Digital program editing
Touch [END].
To save a program without using it to
record
Touch [END] in step 11.
The program is stored in memory until the
cassette is ejected.
To erase programs
1
Follow steps 1 to 6 in "Recording the
selected scenes as programs" (p. 102),
then touch [UNDO].
2
Touch [DEL 1MARK] to delete the last
set program. Or, touch [ALL ERASE] to
erase all the programs.
3
[EXEC]
Touch
The programs are deleted.
To cancel this operation, touch [CANCEL].
b Note
• You cannot set starting point or ending point on a
blank section of the tape. If there is a blank section
in the picture set as a program, the total time may not
appear correctly.
• When you cannot operate the device correctly using
an i.LINK cable connection, select [IR] in step 11 on
p. 99, and set the [IR SETUP] code.
104
Dubbing/Editing
.