Sony Handycam DCR-HC36 Operating Manual page 98

Connecting an analog VCR to the computer via your camcorder (Signal
convert function) (Continued)
2
Slide the POWER switch of your
camcorder repeatedly to turn on
the PLAY/EDIT lamp.
3
On the LCD screen, touch
t [MENU] t
SET) t [A/V t DV OUT] t [ON]
t t
4
Start playback on the analog
video unit.
5
Start capturing procedures on
your computer.
Regarding operation, refer to the
operating instructions supplied with the
software or the on-line help.
After capturing images and sound, stop
capturing procedures on your computer,
and stop playback on the analog video
unit.
• The bundled software Picture Package or
ImageMixer VCD2 does not support the signal
convert function.
• You may not be able to output the pictures
correctly depending on the condition of the
analog video signal input to your camcorder.
• You cannot transfer pictures with copyright
protection signals to a computer.
• You can use a USB cable instead of an i.LINK
cable to transfer pictures to a computer. Note,
however, that the picture displayed may lack the
same smoothness.
• When you are using the USB cable or an i.LINK
cable to connect your camcorder to a computer,
make sure you insert the connectors in the
correct way. If you insert the connectors
forcibly, damage may occur and cause
camcorder malfunction.
98
(STANDARD
.