Miele FN 22062 ws Operating And Installation Instructions page 41

Display warnings
Message
The  symbol lights up
in the display, the appli-
ance does not get cold,
although the appliance
controls are working.
 is lit up in the display
and the appliance can-
not be used.
The buzzer is sounding
and the  symbol and
the temperature display
are flashing.
A buzzer is sounding.
The  symbol and the
temperature display are
flashing.
Cause and remedy
Demo mode is activated. This allows the appliance to
be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Contact Miele Service for instructions on how to
switch Demo mode off.
The safety lock has been activated.
 Deactivate the safety lock temporarily or switch it
off completely (see "Selecting settings - Activating
or deactivating the safety lock").
The temperature alarm has been activated (see
"Temperature and door alarm"). The temperature in
the freezer section is too warm or too cold.
This could be due to, for example:
– the appliance door being opened too often, or be-
ing left open.
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– a lengthy interruption of the power supply.
 Rectify the cause of the alarm.  will go out.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
The door alarm has been activated.
 Close the appliance door. The buzzer will stop.
This indicates an appliance fault:
 Call Service.
What to do if ...
41