6 Disassembly
· To disassemble P.C.B., wait for 1 minute after power was
off for discharge from electrolysis capacitors.
and
marks indicate screw positions.
·
6.1.
Removal of Rear Cover
1. Remove screws (×12
remove the Rear Cover.
6.2.
Removal of HU-Board
1. Remove 4 screws (A) and then remove the HU Terminal
Block.
2. Remove 4 screws (B).
3. Remove 3 screws (C) and then remove HU-Board.
, ×8
, ×4
, ×5
) and then
TH-42PH10BK / TH-42PH10BS / TH-42PH10EK / TH-42PH10ES
6.3.
Removal of Slot Block
1. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
2. Remove the Flexible Cable from the connector (DS1).
3. Remove 4 screws and then remove the Slot Block.
9