Changing Format Of Video Signal Output From Component Video Out Jacks - Sony CMT-DH30 Operating Instructions Manual

Changing the color system
(Except for European and Russian
models)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
The default setting for color system is
different depending on the area.
Each time you perform the procedure
below, the color system changes as
follows:
NTSC  PAL
1
Press FUNCTION +/–
select "DVD" (or press DVD 
the unit).
2
Press / 
to turn off the system.
3

Press DISPLAY to display the clock.
4
While the clock is displayed, hold
down   then press /
The system turns on automatically and
the color system is changed.
"COLOR NTSC" or "COLOR PAL"
appears in the display.
Note
"––:––" appears in the display if you have not
set the clock.

repeatedly to

on

.
Changing the format of the
video signal output from
COMPONENT VIDEO OUT jacks
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1
Press FUNCTION +/
repeatedly to select "DVD" (or
press DVD  
2
Press PROGRESSIVE
unit repeatedly.
Select "P AUTO" or "P VIDEO" if
your TV accepts progressive signals
and the TV is connected to the
COMPONENT VIDEO OUT jacks.
Otherwise, select "INTERLACE. "
P AUTO (PROGRESSIVE AUTO):
The system automatically detects
the software type and selects the
appropriate conversion method.
P VIDEO (PROGRESSIVE VIDEO):
The system fixes the conversion
method to PROGRESSIVE VIDEO
for video-based software.
Select this if the image is not clear
when you select "P AUTO. "

on the unit).

on the

Continued
21
GB