Dell EMC DSS 9620 Installation And Service Manual page 39

Option
Port B
Port C
Port D
Port E
Port F
Description
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
• Capacity: Specifies the total capacity of the hard drive. This field is undefined for
removable media devices such as optical drives.
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Specifies the drive model of the selected device.
• Drive Type: Specifies the type of drive attached to the SATA port.
Pre-operating system management applications 39