Product Features - VTech Paw Patrol Learning Watch Parents' Manual

TO BEGIN USING THE PAW PATROL
LEARNING WATCH
When you use the watch for the first time, open the cover, then press
the Left + Right + OK Buttons for approximately five seconds to
unlock the try-me mode. You will hear three 'beeping' sounds when
the try-me mode is unlocked. You can then press any button to
activate the watch and set the time.
Press the Left/Right Buttons to select, then press the OK Button to
confirm and move to the next option. A checkmark will be displayed
when the setting is complete.
Note:
• When the battery level is low, most functions on the watch may
not be activated, except for the clock display. It is recommended
to change a new battery as soon as possible before further use.
• If the battery level is too low and cannot keep the clock running,
you will need to enter the time again after the battery has been
replaced.

PRODUCT FEATURES

1. Cover
Open the cover to view the time. When the cover is closed, tap the
bottom of the cover to activate PAW Patrol phrases with a lighting
effect.
2. Left/Right Buttons
Use the Left and Right Buttons to select an activity or option, or to
change options in time settings or alarm mode.
3. Light-Up OK Button
Press the Light-Up OK Button to confirm a selection and move to
the next option in different activities.
OK
6 6
6