Specifications - Sony RM-LJ302 Operating Instructions Manual

When the CD player, tape deck, or MD deck is
connected to the receiver via CONTROL A1/A1
jacks, Auto Function does not work properly.
/ Reprogram the remote (see page 16).
"5.1CH" cannot be selected from the function list
even though the receiver has 5.1CH (/DVD) INPUT
jacks.
/ A communication error has occurred. Point the
remote towards the receiver and select "5.1CH"
from the function list again.

Specifications

General
Remote control system
Infrared control
Power requirements 3 V DC with three LR6 (size-AA)
alkaline batteries
Dimensions
125
15
1 /
Mass (approx.) 130 g (4.5 oz) excluding batteries
Design and specifications are subject to change without
notice.
3
43 33 mm (5 1 /
4
inches)
16
23