Husqvarna LC 247iX Operator's Manual page 8

Remove the safety key
(Fig. 8)
before you do repair work
or maintenance.
Do not expose to rain.
(Fig. 9)
The product or package
(Fig. 10)
of the product is not
domestic waste. Recycle
it at a recycling station for
electrical and electronic
equipment.
The product agrees with
(Fig. 11)
applicable EC directives.
The product agrees with
(Fig. 12)
applicable Eurasian
Customs Union
directives.
The product agrees with
(Fig. 13)
applicable UkrSEPRO
directives.
The product agrees with
(Fig. 14)
applicable RCM
directives. Applies to
AU/NZ only
Noise emission to the
(Fig. 15)
environment according to
the European
Community's Directive.
The product's emission is
specified in the Technical
8
data chapter and on the
label.
The product is drip
(Fig. 16)
protected.
Start procedure: push the
(Fig. 20)
ON/OFF button, loosen
the start inhibitor, push
the motor brake handle
down.
Release the motor brake
(Fig. 17)
handle to stop.
(Fig. 18) Slow
(Fig. 19) Fast
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Label on the product
(Fig. 21)
Keep hands and feet away from
the rotating blades.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
890 - 002 - 21.12.2018