SonicWALL Content Security Manager 2200 Getting Started Manual page 30

Preparing the SonicWALL ADConnector Configuration Tool for First Use
1. Expand the Users list to view the users.
2. The first time you click on a user, the SonicWALL ADConnector prompts you for the
Active Directory attributes for the SonicWALL ADConnector. Click OK in the Warning
dialog box.
3. In the Attribute Selection dialog box, select attributes that are otherwise unused in
on the system, for example, IP Phone. Select different attributes for the Category
Set. Once the attributes have been selected, filtering policies for AD Category Sets
can now be managed.
Configuring the SonicWALL CSM for Microsoft Active Directory
1. In the SonicWALL CSM management interface, select Users and Hosts > Settings.
2. In the Authentication Method section, select Use Directory Services Connector
and click the Configure button. The SonicWALL Directory Services Connector
Configuration window is displayed.
3. Enter the IP address of the computer/server running the Directory Services
Connector in the IP Address field.
4. Enter a port number in the Port Number field.
5. In the Shared Secret field, enter the same as the shared key you configured for the
SonicWALL ADConnector when you installed it. The shared secret must be a
sixteen-digit hexadecimal number, for example, 0123456789abcdef.
6. Click OK to apply the configuration.
7. In the Users and Hosts > Settings page, click Configure for Directory Services
Connector again.
SonicWALL CSM Series Appliance Getting Started Guide Page 29