Related Manuals for Radial Engineering DiNET DAN-TX2
Summary of Contents for Radial Engineering DiNET DAN-TX2
- Page 1 True to the Music™ ® DiNET DAN-TX2 2-Channel Dante Network Transmitter User Guide Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam British Columbia, Canada, V3C 5M5 Tel: 604-942-1001 • Fax: 604-942-1010 Email: info@radialeng.com...
-
Page 2: Table Of Contents
Block Diagram ................7 Specifications ................9 Warranty ...............Back cover Thank you for purchasing the Radial DiNET DAN-TX2. The DAN- TX2 is a high-resolution stereo direct box designed to connect to a Dante™ enabled Ethernet network and seamlessly convert analog audio to a digital format compatible with Dante. This... -
Page 3: Overview
True to the Music ® OVERVIEW The DiNET DAN-TX2 is an analog to digital converter that is designed to take the signal from both consumer and professional line-level audio sources and transmit them over an existing Dante or AES67-enabled network. -
Page 4: Features
SYS LEDS: Red LED illuminates when power is first applied, green LED illuminates once Dante processor becomes active. +15V LED: Will illuminate when the DAN-TX2 is connected to the included DC power adaptor. POE LED: Will illuminate when the DAN-TX2 is receiving Power over Ethernet (PoE). Radial Engineering Ltd. DAN-TX2... - Page 5 Wired in parallel with the XLR/TRS and 3.5mm inputs. 15. XLR/TRS COMBO INPUTS: Balanced inputs for connection to professional audio playback sources. 16. NON SLIP PAD: Provides electrical & mechanical isolation and keeps the unit from sliding around. Radial Engineering Ltd. DAN-TX2...
-
Page 6: Getting Started
The DAN-TX2 connects to an Ethernet switch using a standard CAT5e or CAT6 cable. Once the Ethernet switch is connected to a computer running the Dante Controller software, the DAN-TX2 will appear as an available transmit device. Dante Network Radial Engineering Ltd. DAN-TX2... -
Page 7: Using With Unbalanced Signals
Only one set of inputs should be used at a time, as they will all sum together to the left and right Dante outputs over Ethernet. To connect more than one device at a time to the Dante network, use multiple DAN-TX2 units. Link Dante Network Radial Engineering Ltd. DAN-TX2... -
Page 8: Using With Professional Line Level Equipment
The DAN-TX2 can be mounted in standard 19” equipment racks using the optional SA Series Rack Adaptor kit (Part # R800 9422). This 1 RU adaptor allows you to mount one or two DAN-TX2 receivers in a single rack space. Radial Engineering Ltd. DAN-TX2... -
Page 9: Block Diagram
True to the Music ® Radial Engineering Ltd. DAN-TX2... - Page 10 True to the Music ® Radial Engineering Ltd. DAN-TX2...
-
Page 11: Specifications
Operation of this device in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense. * Subject to change without notice. Radial Engineering Ltd. DAN-TX2... - Page 12 THREE YEAR TRANSFERABLE LIMITED WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding finish and wear and tear on components under normal use) for a period of three (3) years from the original date of purchase.