Honeywell MN series IM Owner's Manual page 12

USE & OPERATION
Remote Control
The functions work the same as the portable air conditioner's touch
controls. All key functions can be accessed from the remote control.
Power Control
ON / OFF
Fan Speed Control
HIGH MEDIUM LOW
Timer Control
In running mode:
Auto switch off
In stand-by mode:
Auto switch on
▼
Press " " or "▲" button
to adjust the time
setting for 1 hour intervals.
Caution
Do not place the remote control in direct sunlight.
11
Temperature / Timer Set
Control
Used for adjusting the timer
and temperature.
The default display is room
temperature.
▼
When " " or "▲" key is
pressed in cool mode, the set
temperature is displayed and
may be adjusted. After 10
seconds the display will revert
back to room temperature.
Timer setting is available from
1-24 hours by pressing the
▼
key " " or "▲"
Mode Control
Press this button to change the
operation mode in the order of:
Cool Dehumidify
Fan