Transmitter With Din Aluminum Housing - Horizontal Flanges With Mounting Bracket For Vertical Or Horizontal Mounting On 60 Mm (2 In.) Pipe - ABB 2600T Series Operating Instruction
Multivariable pressure transmitters
Hide thumbs
Also See for 2600T Series:
- Instruction manual (136 pages) ,
- Operating instructions manual (96 pages) ,
- Operating instruction (48 pages)
Table of Contents
Advertisement
8.6.4
Transmitter with DIN aluminum housing - horizontal flanges with mounting bracket for vertical or horizontal
mounting on 60 mm (2 in.) pipe
Fig. 12: Pipe mounting - DIN housing
*
54 (2.13) mm (in.) via 1/4 - 18 NPT process flanges
51 (2.01), 54 (2.13), or 57 (2.24) mm (in) via 1/2 - 14 NPT adapter flanges.
Note: Process connection and seal groove satisfy IEC 161518. Thread for attaching adapter flanges or other components (e.g., manifold) on the process flange: 7/16 -
20 UNF.
22 OI/266CXX/266JXX/HART-EN Rev. B | 266CRx, 266JRx, 266CSx, 266JSx
Advertisement
Table of Contents
